Zero incidents starts with real-time AI.
Construction sites account for the highest rate of workplace fatalities. KenSafety monitors your entire site 24/7 — detecting PPE violations, restricted zone breaches, falls, and hazardous behaviors before they become incidents. Alerts in under 3 seconds, on your existing cameras.
Why Construction Remains the Most Dangerous Industry
Construction accounts for one in five worker fatalities. The root causes are predictable — and now, preventable with AI that monitors every zone, every camera, every second.
PPE Non-Compliance
Manual PPE checks are infrequent and miss the vast majority of violations. Workers entering high-risk zones without hard hats, vests, or gloves create constant exposure. AI monitors every camera feed simultaneously — catching every violation the moment it occurs, regardless of site size.
Restricted Zone Breaches
Crane operating zones, excavation perimeters, and heavy equipment paths present immediate life threats when breached. Physical barriers are regularly removed or ignored. KenSafety creates virtual perimeters on existing cameras and triggers instant alerts — no physical infrastructure needed.
Incident Reporting Lag
Traditional safety management relies on post-incident reporting — which means data arrives after the harm has occurred. Paper-based logs, manual observations, and periodic inspections create hours-long gaps between a hazard forming and any corrective action being taken. AI closes that gap to seconds.
What KenSafety Detects on Construction Sites
Four core AI detection capabilities designed specifically for the dynamic, high-risk environment of active construction sites.
PPE Compliance Detection
Continuously identifies every worker visible on camera and verifies they are wearing required PPE — hard hats, hi-vis vests, safety gloves, and protective boots. Violations trigger instant alerts to site supervisors with camera feed, timestamp, and location.
Restricted Zone Monitoring
Define virtual exclusion zones on any camera view — crane swing areas, live electrical zones, excavation edges. When a person or vehicle enters a restricted zone, KenSafety triggers a sub-3-second alert. Zones are configurable without any physical changes on site.
Fall & Slip Detection
Detects sudden falls, trips, and body posture changes that indicate a slip or collapse event. When a worker falls, KenSafety immediately alerts emergency responders and captures the event clip — enabling faster response when every second counts.
Real-Time Alert System
Multi-channel alerts reach site managers via dashboard, SMS, email, and integration with on-site PA systems. Every alert includes the camera location, event type, timestamp, and a snapshot — giving supervisors complete context for immediate, targeted response.
Deployed in Days. Protecting Workers from Day One.
KenSafety integrates with your existing site cameras and begins generating safety intelligence without any hardware changes or downtime on site.
Connect Site Cameras
KenSafety connects to any IP camera, CCTV, or NVR already installed on your site. No new hardware. No cabling. Existing infrastructure is leveraged from day one.
Configure Safety Rules
Define which PPE is required in which zones. Draw virtual restricted area boundaries on camera views. Set alert thresholds and escalation workflows — all through the KenSafety dashboard.
AI Monitors 24/7
Computer vision models analyze every camera frame in real time — detecting PPE violations, zone breaches, falls, and hazardous behaviors simultaneously across every camera, without fatigue or distraction.
Alert, Respond, Report
Alerts reach supervisors in under 3 seconds. Incident clips and compliance logs are automatically generated, supporting OSHA, HSE, and ISO 45001 audit requirements with zero manual effort.
Built for the Realities of Active Construction Sites
Outdoor-Optimized AI
Models trained for outdoor conditions — variable light, weather, dust, and occlusion. Reliable accuracy at dawn, dusk, and in overcast or night-lighting conditions.
No New Hardware
Works with cameras already on site. Protect your existing investment. KenSafety runs at the edge, in the cloud, or hybrid — your infrastructure, your choice.
Compliance Documentation
Automatic incident logs, compliance reports, and audit trails for OSHA, HSE, CCOHS, and ISO 45001 — eliminating manual safety reporting paperwork.
Multi-Site Visibility
Monitor safety performance across all active project sites from one dashboard. Identify patterns, benchmark sites, and deploy resources where risk is highest.
Frequently Asked Questions
Everything you need to know about AI construction site safety monitoring.
KenSafety uses computer vision models trained specifically on construction environments to identify personal protective equipment — hard hats, safety vests, gloves, and boots — in real time. When a worker enters a monitored zone without required PPE, an alert is triggered within 3 seconds.
Yes. KenSafety is designed for outdoor construction sites and adapts to varying lighting conditions, including dawn/dusk, overcast skies, and artificial lighting at night. The AI models are trained on diverse environmental conditions to maintain high accuracy year-round.
KenSafety integrates with any IP camera, CCTV system, or NVR — including cameras already installed on site. No new hardware is required. The system connects to your existing camera feeds and begins monitoring immediately after configuration.
Alerts are delivered in real time through the KenSafety dashboard, SMS, email, and can integrate with site communication systems. Each alert includes a timestamp, camera location, and event snapshot so managers can respond immediately with full context.
KenSafety can be configured for edge-only processing, where video is analyzed on-premise and never sent to external servers. Incident clips are stored locally or in a secure cloud environment for a configurable retention period — typically 30–90 days — to support compliance and incident review.
Ready to make your site
incident-free?
Book a 30-minute live demo. See exactly what KenSafety would detect on your construction site's existing camera feeds — no commitment required.
65% incident reduction — on a live construction site
See how a construction firm reduced incidents by 65% and achieved 90%+ PPE compliance using KenSafety AI monitoring.
Read the Case Study →